Unfortunately, the plant update to improve the efficiency of the exhaust fans in a large cement works created a serious noise problem that generated complaints from miles around. A novel, low cost attenuation system was designed and fitted over a weekend to avoid the eye-watering down-time cost required to implement conventional solutions.
Conventional stack silencing would have resulted in an unacceptable delay in solving the problem plus massive capital and prolonged shut-down costs. Our alternative solution was based on the design of a set of bespoke stack silencer elements tuned to suit the noise signature. These were pre-fabricated off site and then inserted into the stack through a small access door over a weekend. The result was a 19dB noise reduction over the critical frequency range with no effect on the fan and stack efficiency – and at a small fraction of the cost of conventional silencing.