Industrial Noise & Vibration Centre

+44 1753 698 800

Grass Mowing Machine

dennis grass mower vibration control

Manufacturers are under increasing commercial pressure from their customers to develop low vibration plant. The innovative low-vibration handle developed by the INVC for a Dennis Mowers lawn-mower reduced operator exposure from 6m/s^2 down to 2m/s^2 – without compromising mower control. This is a dramatic improvement that would allow operators to use the mower all day without reaching the 2.5m/s^2 Exposure Action Value.

This was developed and tested in prototype form within around 4 hours of arriving on site...